SISER® EasyWeed Extra - 15 inch x 30 ft - Fluor. Raspberry

Home > Fabric Imprinting > Transfer Materials > SISER® Heat Press Mat. > SISER® EasyWeed Extra > SISER® EasyWeed Extra - Fluor. > 15 inch x 30 ft > SISER® EasyWeed Extra - 15 inch x 30 ft - Fluor. Raspberry

SISER® EasyWeed Extra - 15 inch x 30 ft - Fluor. Raspberry

Quantity in Basket: None
Code: TEX-SI-EWE-1530-1030
Price: $91.84
Ship Weight: 2.30 lbs.
Rating: 5 out of 5

Read Reviews

Quantity:

SISER® EasyWeed Extra—
• HOT Peel film for nylon, lycra®/spandex and leather
• CAD-Material goes for difficult fabrics
• Thinner than other films - easier to cut
• Weed small letters and fine details
• Pressure sensitive carrier • Light pressure: 320°F for 10-15 seconds
• Application Directions: Reverse cut. This is a HOT peel product. Weed excess material. Preheat. Position EasyWeed Extra application on garment and heat apply 320º for 10-15 seconds, light pressure. Release paper or Teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design.
• Wash Instructions: Labeled on garment. Excellent durability, even after repeated washings.

For best results with layered graphics, always apply layers of like product. For instance, EasyWeed Extra on EasyWeed Extra. Mixing thermal transfer films in layered graphics may result in peeling of layers when the garment is laundered.

Customer Reviews

Average Customer Review: 5 out of 5

2 Reviews
Write an online review and share your thoughts with others.

Great For Jerseys, 9.8.2009

Reviewer: Jim McKay (Hemet, CA)

This works great for nylon jerseys! It's much better than the products I've used in the past.

Siser EasyWeed is much better, 7.14.2009

Reviewer: Tot Bowen (Steger, IL)

I like this material much better than any other I've used. When they say easy weed, they are not kidding!