• Matte polyurethane transfer flex for heat sensitive materials
• For use with Nylon • Very thin and soft, high bond with nylon
• Self adhesive carrier • 2.2 - 2.4 mil
• Heat pressing: 270-300°F for 10-15 seconds • Firm pressure. Peel cold.
• Application Directions: Reverse or mirror cut. Cool peel. Weed excess material. Release teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design. Heat transfer at 270-300°F for 10-15 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated, if necessary. For best results with layered graphics, always apply layers of like product. For instance, AllMark 2 on AllMark 2.
• Wash Instructions: Wash cool. Temperatures of 90°F, wash inside out. Tumble drying is not recommended.
|
SignWarehouse.com® 1-800-699-5514
