• Very glossy polyurethane flex
• 10 colors
• Actual material size: 14” width
• Use a 45° blade for cutting
• For cotton, polyester, acrylic and non-siliconized material
• The special self adhesive layer makes for easy cutting and weeding
• Very thin and stretchable
• 2.4 mil
• Self adhesive carrier
• Heat pressing: 280-300°F for 10-20 seconds
• Application Directions: Reverse or mirror cut and peel cool. Weed excess material. Lay cut pattern on fabric. A release teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design. Heat transfer at 280-300° F for 15-20 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated, if necessary.
• Wash Instructions: Hand wash on reverse side. Tumble drying is not recommended.
Note: Due to variety of textiles and their treatments, conduct a print trial before each use. For best results, always apply layers of like products. (Ex. Metallic on Metallic). Mixing transfer films in layered graphics may result in peeling of layers when washed.
|
SignWarehouse.com® 1-800-699-5514
