|
Use for cotton, polyester, acrylic, and other non-siliconized materials. EnduraTex Metallic is a very glossy polyurethane flex material. The special self adhesive layer makes for easy cutting and weeding. Cut in mirror image through the adhesive layer to the plastic backing, weed excess material, and lay the pattern on the fabric. Then cover the design area with paper or cloth. Apply heat transfer at 280°F for 10-20 seconds with firm pressure and peel away backing sheet when transfer is cool. Washability tempature: Hand wash insideout, cool wash. Also, tumble drying is not recommended. Use a release paper or Teflon sheet placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design.
|
SignWarehouse.com® 1-800-699-5514
