 |
|
|
|
 |
|
|
|
- In
addition to Roland’s legendary reliability, the GX-24 Servo desktop
vinyl cutter offers enhanced productivity and quality. Powered by a
digital servomotor, it achieves cutting speeds up to 20 inches per
second and maximum accuracy. Vehicle graphics, signs, decals, labels,
stencils and even pinstriping always come out looking crisp and clean.
Roland GX-24 Vinyl Cutter
- Width: Accepts material from two to 27.5 inches wide
- Mechanical Resolution: 0.0005”
- Speed: Cutting speeds up to 20 inches per second
- Power: Max down force of 250 grams
 Optical Registration:
Recognizes crop marks produced by a variety of print-only devices and
automatically aligns media so that printed graphics can be accurately
contour cut.
- Materials: Vinyl, paint mask, reflective vinyls, twill, heat transfer, and sandblast
- Roland CutStudio™ Software included
- Earn Sign Warehouse Reward Points
Earn points with each GX-24 purchase that translate into actual $$$ saved on future purchases. More Info
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Precision Cutting
The
GX-24 Servo uses a digital servomotor to achieve maximum accuracy and
cutting speeds up to 20 inches per second. The desktop cutter also
features a curve-smoothing function that allows precise cutting even at
high speeds. The result is faster production and more
professional-looking graphics.
Materials
From
two to 27.5 inches wide, the GX-24 Servo accepts a wide range of
materials. It cuts vinyl, paint mask, reflective vinyls, twill, heat
transfer, and sandblast material.
Small And Intricate Designs
Blade
offset values can be adjusted manually for optimum results on a wide
range of materials. An optional small-lettering blade produces sharp,
hi-quality results for small and intricate designs.
Cutting Printed Graphics
The
GX-24 Servo includes an optical registration system that automatically
recognizes desktop printer crop marks and aligns media to create a
powerful and cost-effective print and cut solution.
Easy to Use
A
newly designed blue LCD panel is perfectly positioned for easy viewing
and navigation. The GX-24 Servo’s control panel has a blade groove on
its apron for easy manual cutting. A sheet roller base is included with
every GX-24 Servo to keep media feed straight. An optional stand is
also available.
CutStudio Software
Every
GX-24 Servo vinyl cutter ships with Roland CutStudio design software.
CutStudio lets users enlarge, reduce, re-position, rotate and mirror
images. It also cuts enlarged images as crisp as original size, cuts
TrueType fonts without outlining, and creates overlays by selecting
individual colors for cutting. CutStudio supports BMP, JPG, STX, AI,
and EPS file formats. It is compatible with Windows 98 SE/ME/2000/XP.
Roland Reliability
Roland
cutters have earned worldwide reputation for reliable performance and
outstanding results. Today, like all Roland products, they come with an
international ISO certification. This signals Roland’s commitment to
offering top quality products backed up with first-rate customer
service and a wide variety of supplies and accessories.
Over the past 17 years, Roland has sold more than quarter million vinyl
cutters worldwide. Most of them are still in production today. Modern
Image of Huntington Beach, CA still uses a Roland vinyl cutter that it
purchased more than a decade ago. “It runs all day, everyday and has
never needed a single repair,” said Robert Wilson, Modern Image
president. “Today, we have seven Roland’s lined
up and cranking out awesome vehicle graphics.”
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
MODEL |
GX-24 |
Driving method |
Digital control servo motor |
Cutting method |
Media-moving method |
Acceptable media width |
2” to 27.5” (50 to 700mm) |
Maximum cutting area |
Width:22.9” (584mm) Length: 984” (25m) |
Acceptable tool |
Special blade for CAMM-1 series |
Maximum cutting speed |
20ips all directions (500mm/sec) |
Cutting speed |
4 to 20ips (10 to 500mm/sec) |
Blade force |
30 to 250gf |
Mechanical resolution |
0.000492” (0.0125mm) |
Software resolution |
0.000984” (0.025mm) |
Distance accuracy(1) |
Error of less than +/- 0.2% of
distance traveled, or +/- 0.004” (+/- 0.1mm), whichever is greater |
Repetition accuracy (1)(2) |
+/- 0.004” (+/- 0.1mm) or less |
Alignment accuracy for printing and cutting when loading printed material (1) (3) |
+/- 0.04” (+/- 1mm) |
Interface |
USB interface (compliant with Universal Serial Bus
Specification Revision 1.1)
|
| Serial (RS-232C) |
Re-plot memory |
800KByte |
Instruction system |
CAMM-GL III |
Power supply |
Dedicated AC adapter |
| Input: AC 100 to 240 V +/- 10% 50/60
Hz 1.7A |
| Output:DC 24V, 2.8A |
Power consumption |
Approx. 30W (including AC adapter) |
Acoustic noise level during operation |
70 dB(A) or less (according to ISO 7779) |
Acoustic noise level during standby |
40 dB(A) or less (according to ISO
7779) |
Dimensions |
33.5” (W) X 12.2” (D) X 9.25” (H) |
| [851mm (W) X 310mm (D) X 235mm (H)] |
Weight |
35 lb. (16kg) |
Packed dimensions |
41.2” (W) X 17.75” (D) X 15.2” (H) |
| [1050mm(W) X 450mm (D) X 390mm (H)] |
Packed weight |
49 lb. (22kg) |
Environment |
Temperature: 41 to 104 degrees F, (5 to 40 degree C),
humidity: 35 to 80% (no condensation) |
Included items |
AC adapter, power cord, blade, blade
holder, separating knife, roller base, tweezers, test-use material,
application tape, USB cable, CD-ROM, user’s manual |
(1) According to material and cutting
conditions as specified by Roland DG Corp.
(2) Excluding material
expansion and contraction.
Provided that media length is less
than 118” (3000mm)
(3) According to Roland DG Corp. measurement
criteria:
Using the included software from Roland Corp.
Using a laser or ink-jet printer having a resolution of 720dpi
or better.
Excluding glossy or laminated material
Excluding effects of printing distortion due to printer
precision and effects of material expansion, contraction, or
warping.
Depending on the ink (black) employed by the printer used,
correct sensing may not be possible. |
|
|
|
|
|
|
|
|
|
|
