A division of SIGNWarehouse

Can't find what you're
looking for? Site Map

• Read an outstanding review of the
  Pinnacle M-Series engraver!
  Magazine Review
• About the Manufacturer
• Request a Sample
• See Specifications
• Suggested Wattage and Speed Settings

Pinnacle M-Series with pass through doors means there's no need to turn down oversize jobs. Large work area. Features: Auto Focus, Motorized Working Table, Stamp Mode, and much more! 30 and 40 watt models.

Large Work Area!

Auto Focus
While manual focusing can be a tedious process and subject to error, auto focusing is made easy with one-touch focus capability. Depending on the lens used, you can focus to a specific distance from the material for optimum quality. And, since the laser beam is five thousands (.005) of an inch in diameter, it's extremely accurate!

Cut and Engrave in One Pass
Unlike rotary engraving where you need to change out tools for each process, the Pinnacle laser engravers will cut and engrave all with a beam of light. You'll waste less time setting up your engraver. All you need is your text or image along with an outline to cut out. The Pinnacle laser engraver will see the text or image just like a printer sees it. Then when it comes to the outline, it will follow the path to cut it out. When used along with the “sorting” feature this is a function that puts the Pinnacle laser above the competition.

DC Servo Motor
Servo control moves the motor to the desired position using an x/y coordinate. For example, when your computer tells the engraver or cutter that x=1000 and y=1000, the engraver or cutter will move to the location that corresponds to those numbers.

3D Engraving
Produce true 3D images with 256 shades of gray Pinnacle laser engraver. Just use any grayscale photo with 256 shades of gray. The darker the shade of each pixel in the original photograph, the more power the laser applies. More power means deeper engraving.

The Pinnacle line of engravers takes this procedure to the most accurate representation of TRUE 3D engraving. Most lasers use a black and white mode, which use a density effect as opposed to 3D engraving which uses a power effect. With our 3D mode selection the power will ramp up higher for the darker portions and ramp down for the lighter portions.

Stamp mode
Making a rubber stamp can be easy and cost effective when made properly. The Pinnacle makes your rubber stamp manufacturing easier by allowing you to set proper thickness and pitch. You don’t have to worry about smudging or unclear lettering with stamp mode, which is always a standard on the Pinnacle laser engravers.

Up to 64 meg Buffer
Buffer size is vital when engraving photos or any large images. When sending a photo to your engraver you will want to know that the whole image is getting there. A photo can take up a lot of room in your buffer. Pinnacle lasers allow storage up to 64 megabytes for keeping files in your engraver and not having to worry about losing them.

Optional Dual Head Unit
The dual head unit allows you to work more effieciently without wasting time and materials.

Laser Engraving Equipment Specifications

*Above specifications are subject to change without notice.