 |
|
 |
| Cut 1/2" Acrylic! |
11.8" x 8.25"
Table |
Save Even More! |
 Auto Focus
While manual focusing can be a tedious process and subject to error, auto
focusing is made easy with one-touch focus capability. Depending on the
lens used, you can focus to a specific distance from the material for
optimum quality. And, since the laser beam is five thousands (.005) of an
inch in diameter, it's extremely accurate!
 Cut
and Engrave in One Pass
Unlike rotary engraving where you need to change out tools for each
process, the Pinnacle laser engravers will cut and engrave all with a beam
of light. You'll waste less time setting up your engraver. All you need is your text or image along with an outline to cut out. The Pinnacle laser engraver
will see the text or image just like a printer sees it. Then when it comes
to the outline, it will follow the path to cut it out. When used along with
the “sorting” feature this is a function that puts the Pinnacle laser
above the competition.
 DC Servo Motor
Servo control moves the motor to the desired position using an x/y coordinate. For example, when your computer tells the engraver or cutter that x=1000 and y=1000, the engraver or cutter will move to the location that corresponds to those numbers.
3D Engraving
Produce true 3D images
with 256 shades of gray Pinnacle laser engraver. Just use any grayscale
photo with 256 shades of gray. The darker the shade of each pixel in the
original photograph, the more power the laser applies. More power means
deeper engraving.
The Pinnacle line of engravers takes
this procedure to the most accurate representation of TRUE 3D engraving.
Most lasers use a black and white mode, which use a density effect as
opposed to 3D engraving which uses a power effect. With our 3D mode
selection the power will ramp up higher for the darker portions and ramp
down for the lighter portions.
Stamp
mode
Making a rubber stamp can be easy and cost effective when made properly. The
Pinnacle makes your rubber stamp manufacturing easier by allowing you to set
proper thickness and pitch. You don’t have to worry about smudging or
unclear lettering with stamp mode, which is always a standard on the
Pinnacle laser engravers.
Up to 64 meg Buffer
Buffer size is vital when engraving photos or any large images. When sending
a photo to your engraver you will want to know that the whole image is
getting there. A photo can take up a lot of room in your buffer. Pinnacle
lasers allow storage up to 64 megabytes for keeping files in your engraver
and not having to worry about losing them.
From
Our Mailbox
"We purchased a
Venus 35 watt laser engraver. After having our equipment shipped to
us and familiarizing ourselves with it, we still had unanswered
questions. Eddie Larue gave me tech support over the phone and
encouraged us to fly to Sign Warehouse for additional training and
to learn all of the laser’s capabilities. After spending four hours
with Eddie, I felt very comfortable with our new laser and what it
could do."
-- Tim and Cris E. |
| V-Series Specifications: |
V-12 (12Watt) , V-30 (30Watt) |
| Laser Source |
Sealed CO2 Laser |
| Work Area |
11.8" x 8.3" (300mm x 210mm) |
Max. Working Piece
(W x D x Thick) |
14.2" x 11.8" x 2.8"
(360mm x 300mm x 70mm) |
Overall Dimensions
(W x D x H) |
24.4" x 17.1" x 16.5"
(620mm x 435mm x 420mm) |
| Table Size |
11.8" x 8.25" |
| Drive |
DC Servo Motor |
| Cutting Speed Control |
Adjustable from 0.02 to 20 inch/sec
with up to 16 colors linked speed setting per job |
| Engraving Speed Control |
Adjustable from
3.0%
to 100%
with up to 16 colors linked speed setting per job |
| Power Control |
Adjustable from 0 to 100% with up to 16 colors
linked power setting per job |
| Z
Axis Moving |
Automatic |
| Resolution (dpi) |
1000, 600, 500, 300, 250, 200 |
| Computer Interface |
Printer port (LPT) and/or serial port (Comm)
for PC |
| Memory Buffer |
16MB standard upgradeable to 64MB with SIMM
modules. Multiple file mode saves up to 100 files! |
| Display Panel |
4-line LCD display showing current file name,
total
working time, laser power, engrave speed, file
loaded, setup and diagnostics. |
| Power |
100 - 240 VAC, 10 Amp, AC Auto Switch |
| Cooling |
Air-cooled |
*Above specifications are subject to change without notice.
V Series (Venus) Available Accessories |
| Part Name |
|
Part # |
Optional |
| Vector Cutting Table |
|
ENA-SM-VECTOR |
Yes |
| Honey Comb table |
|
Not Applicable |
Yes |
| Air Compressor |
|
ENA-ZX-COMPRESSOR |
Yes |
| Blower |
|
ENA-PSI-DC3XX |
Yes |
| Odor Reduction Unit |
|
ENA-GCCBK06077 |
Yes |
|
|
|
|
| Lenses |
1.5 |
ENA-GCCBK013APB |
Standard |
|
2.0 |
ENA-GCCBK013AQB |
Yes |
|
2.5 |
ENA-GCCBK013ARB |
Yes |
|
4.0 |
Not Applicable |
No |
| Cleaning Kit |
|
ENA-OPTIC-CLEAN-KIT |
Refill |
| Mirrors |
# 1 |
ENA-GCCBK01345C |
Standard |
|
# 2 |
ENA-GCCBK01370B |
Standard |
|
# 3 |
ENA-GCCBK01370B |
Standard |
|
# 4 |
ENA-GCCBK01324A |
Standard |
| Auto Focus Pen |
|
P-BK01325E |
Standard |
|
