Pinnacle ZX-Series Engraving Machines
with QSM™ -- Stellar Quality
at 100% Speed
|
Oversized 38" x 20" model
The laser engraver by which all
others are measured!
|
LIMITED TIME OFFER
Pinnacle ZX 30 Watt Special Package
Hurry! Expires June 30, 2008
Pinnacle ZX 30 Watt Special Details
|
Introducing
the all-new Pinnacle ZX-Series.
Standard Features include: Auto Focus, Air Assist, 3D Engraving, Intelligent
Rubber Stamp Engraving, Multiple/single job selection, high speed DC servo
control. NEW Features include:
QSM™ -- Stellar Quality at 100% Speed,
Oversized Work Area, Easy-Open Rear Panel, Low Maintenance Motion System,
Graphic Control Panel, SmartFILE Management, Built-in USB Port, SmartGUARD
System (Optional). |
 |
|
 |
| Oversized Work Area |
Auto Focus
and Continuous Air
Flow Nozzle |
Save Even More! |
Auto Focus
While manual focusing can be a tedious process and subject to error, auto focusing is made easy with one-touch focus
capability. Depending on the lens used, you can focus
to a specific distance from the material for optimum quality. And, since
the laser beam is five thousands (.005) of an inch in diameter, it's
extremely accurate!
 Cut
and Engrave in One Pass
Unlike rotary engraving where you need to change out tools for each
process, the Pinnacle laser engravers will cut and engrave all with a beam
of light. You'll waste less time setting up your engraver. All you need is your text or image along with an outline to cut out. The Pinnacle laser engraver
will see the text or image just like a printer sees it. Then when it comes
to the outline, it will follow the path to cut it out. When used along with
the “sorting” feature this is a function that puts the Pinnacle laser
above the competition.
Look at These Pinnacle ZX-Series Features! |
|
|
|
QSM - Quality Speed Mode
QSM addresses the common problem of poor output quality while
engraving at high speed. The exclusive QSM capability allows The ZX-Series
to maintain excellent quality output and achieve stellar quality at 100%
speed. |
Graphic Control Panel
User-friendly menu system helps you to work easier. A graphic control panel
with up, down, back and forth scrolling makes function selection simple.
Just like your cell phone. |
SmartGUARD System
Laser cutting and engraving operation using the SmartGUARD system assures
optimum safety. When there is a malfunction, the alarm system will be
activated and it will shut-down the operation system immediately. |
|
|
|
Low Maintenance Motion System
Avoid abrasion and mechanical vibration problems with the ZX-Series'
superior low maintenance motion system. Solid construction provides years of
high quality output. |
Built In USB Port
USB connectors are faster than a parallel ports and can be hot-swapped
without having to shut the computer off when installing the USB. Basically,
you plug it in to the computer and it is ready to run. |
Easy Open Rear Panel
With SmartEXT, accommodate extremely long working pieces in seconds. The ZX-Series'
easy-open rear panel means you can throw away your screwdriver. |
From
Our Mailbox
"I have recommended the
Pinnacle laser engraver and Signwarehouse to any one and everyone
who has asked my opinion. These folks stand behind their product. I
have never had any problems or second thoughts about my purchase."
--
Chris W. |
| ZX Specifications |
|
| Model No. |
ZX-30 |
ZX-35 |
ZX-40 |
ZX-50 |
ZX-60 |
ZX-100 |
| Laser Source |
30W |
35W |
40W |
50W |
60W |
100W |
| Sealed Air Cooled CO2 Laser |
| Work Area |
32" X 20" (812mm x 508mm)
Extendable to 38" X 20" (965.2mm X 508mm) with SmartACT function |
| Max. Working
Piece |
all doors
closed |
40.5" X 22.8"
X 6.5" (1030mm X 580mm X 165mm) |
| |
all doors open |
39" X
unlimited X 6.3" ( 990mm X unlimited X 160mm) |
| Table Size |
40.5" X 22.8" (1030mm X 580mm) |
| Overall
Dimensions |
50.4" X 28.5"
X 38.5" ( 1280mm X 725mm X 980mm) |
| Drive |
DC Servo control |
| Speed Control |
Available
from 0.1~100% of 80 ips with up to 16 colors linked speed setting per
job |
| Power Control |
Available from 0.1~100% and 16 colors linked
power setting per job |
| Z Axis Moving |
Automatic |
| Resolution (DPI) |
Available 125, 250, 300, 380, 500, 600, 750,
1000 |
| Computer
Interface |
Standard
print port and USB port |
| Memory Buffer |
32MB standard and upgradable to 64MB |
| Lens |
Standard 2.0"
focal lens in enclosed lens carriage; optional lenses available. (1.5",
2.5", 4.0") |
| Display Panel |
Graphic LCD display |
| Safety |
Class IIIA
for red pointer |
Facility Requirements |
| Electricity |
100~240VAC auto switch |
200~240V |
| Power Consumption |
1100W |
2000W |
3000W |
| Exhaust System |
External exhaust system is required |
*Above specifications are subject to change without notice.
|
ZX Series (Explorer) Available Accessories |
| Part Name |
|
Part # |
Optional |
| Vector Cutting Table |
|
ENA-LGZX-VECTOR |
Yes |
| Honey Comb Table |
|
ENA-GCCBK014i7 |
Yes |
| Air Compressor |
|
ENA-ZX-COMPRESSOR |
Yes |
| Blower |
|
ENA-PSI-DC3XX |
Yes |
| Odor Reduction Unit |
|
ENA-SPC-ODORREDU |
Yes |
| Rotary Attachment |
|
ENA-GCCBK01213D |
Yes |
| Lenses |
1.5 |
ENA-GCC-29001308 |
Yes |
|
2.0 |
ENA-GCC-29000312 |
Standard |
|
2.5 |
ENA-GCC-29001309 |
Yes |
|
4.0 |
ENA-GCC-29001312 |
Yes |
| Cleaning Kit |
|
ENA-OPTIC-CLEAN-KIT |
Refill |
| Mirrors |
# 1 |
ENA-GCCBK08049 |
Standard |
|
# 2 |
ENA-GCCBK01370B |
Standard |
|
# 3 |
ENA-GCCBK01370B |
Standard |
|
# 4 |
ENA-GCC29003496 |
Standard |
| Auto Focus Pen |
|
P-BK01325E |
Standard |
|
|
