Results 1 to 3 of 3

Thread: 3amcustoms.com - My website, check it out, critque, rant, whatever :)

  1. #1
    Bronze Member
    Join Date
    Feb 2011
    Posts
    53

    Default 3amcustoms.com - My website, check it out, critque, rant, whatever :)

    Hey guys, and gals,

    tell me what you think..
    Still need to get a store on it, and more pictures, but other then that it's all set up...

    www.3amcustoms.com

    Let me know if you know of any good templates for online stores anyone!

  2. #2
    Platinum Member Jim Doggett's Avatar
    Join Date
    Dec 2009
    Location
    Kirkland WA, USA
    Posts
    936

    Default

    I like it, but it takes a bit of time to figure out what you guys are, especially since it's very blog-like on the home page. The rule of thumb is that a man from mars should know who and what you are within 3 seconds. It took me longer and I am in the industry.

    Plus, the Studio7Design credit should open a new browser and not exit your page, IMO.

    My $0.02
    Jim Doggett

  3. #3
    Platinum Member ajgraphics's Avatar
    Join Date
    Feb 2010
    Posts
    637

    Default

    I would have to agree with Jim here. It needs work, but the design itself is good.
    Alex Gillette
    Adobe CS3, CS4, CS5 Master Suites
    CorelDraw X4, X5 | Wacom Intuos 3 | Roland GX-24, GX-300
    4 Station Screen Printing Press | NEW: YuDu Screen Print Press
    Smart Designer X4, SD Power Graphics 3, SD Smart Concepts 2.0
    iSigns Talk

Similar Threads

  1. Panther/Jaguar Cutter Error, Check Media Or Y Motor
    By Etchman in forum Lynx / Panther / Cougar / Ultra
    Replies: 2
    Last Post: 07-25-2011, 07:03 PM
  2. Panther Error, Check Media Or Y Motor
    By Etchman in forum Generic Vinyl Cutter
    Replies: 3
    Last Post: 07-19-2011, 10:36 AM
  3. My Website
    By ajgraphics in forum Bragging Rights
    Replies: 5
    Last Post: 09-22-2010, 10:53 AM
  4. Our Website
    By Topline Graphics in forum Bragging Rights
    Replies: 2
    Last Post: 05-11-2010, 07:41 PM
  5. panther-61. I'm reading check carriage sensor or VC MOTOR???
    By my3suns in forum Generic Vinyl Cutter
    Replies: 1
    Last Post: 03-22-2010, 10:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •