Install the Roland Stika Driver for Windows 95

• Place the Roland Stika Driver for Windows disk into your floppy drive (Usually drive "A")
• Click on your START button, then go to SETTINGS, then to PRINTERS
• Double click on the add printer icon
• Click on NEXT and choose local printer for printers attached to your computer
• Click NEXT and then click on HAVE DISK at the bottom of the window
• Type in "a:\" in the field for "copy manufacturers files from" then click browse
• Double click the folder for your OS (Windows 3.1 or Win 95)
• Click on  OK and proceed with the installation choosing OK when it lists the Stika as the printer
• Finish your installation of the printer by choosing the right port, normally <Lpt1:>
• Choose not to print a self-test and it should complete the installation
• Go to your Corel Draw program
• On the left side of your screen choose the outline pen then choose outline
• Change the thickness to .001 and then create your drawing
• The default cut is .001 for the Roland Stika so that lets the cutter know the cut
• After you finish your drawing choose the Stika under the print menu and print