 | Cutter Drivers USB and USB Serial (Sign Warehouse does not support use of USB on Panther, Lynx, and Ultra) |  |
 |
// Copyright 1999 InsideDHTML.com, LLC.
function doBlink() {
// Blink, Blink, Blink...
var blink = document.all.tags("BLINK")
for (var i=0; i < blink.length; i++)
blink[i].style.visibility = blink[i].style.visib |
|
|
| Cutter Maintenance |  |
|
Cutter MaintenanceAs with all mechanical equipment, there are certain steps that should be taken to minimize the wear |
|
|
| How do I return equipment for repair? | |
| How do I return equipment for repair? Only Applies for Vinyl CuttersA certified Signwarehou |
|
|
| I have a Bobcat Vinyl Cutter. Can I use a USB connection? | |
|
I have a Bobcat Vinyl Cutter. Can I use a USB connection?Unfortunately you will not be able to get r |
|
|
| I have a Lynx Vinyl Cutter. Can I use a USB connection? | |
|
I have a Lynx Vinyl Cutter. Can I use a USB connection?Unfortunately you will not be able to get run |
|
|
| Lynx - Replacing Pinch Rollers | |
| Lynx - Replacing Pinch Rollers
Refer to Fig 1-2 while performing the steps to remove the pinch roller set.
Removing the Square Bar Holding Bracket.
Undo the two screws that fix the bracket to the ca |
|
|
| UPDATED - How do I setup my cutter? | |
| How do I setup my cutter?or, "How do I connect my cutter to my computer?" - |
|
|
| What is the maximum / recommended cable length that I can run my cutter on | |
|
What is the maximum / recommended cable length that I can run my cutter on?
This will depend on how you're cutter is connected to your computer:
Serial (RS-232C)
Maximum Distance: |
|
|
