 | Contour Cutting from Flexi Pro 8.x Using the Graphtec & Q Series Cutter |  |
 | Contour Cutting from Flexi Pro 8.xUsing the Graphtec FC-7000/CE-3000 MKII/Vinyl Express Q-series (RMS Option installed)1. The first Step is to add a |
|
|
| Installing the Q-Series Cutter |  |
| Installing the Q-Series Cutters |
|
|
| Adjusting the Offset on Q-60wARMS & CE3000MkII-60 | |
| Q-60wARMS & CE3000MkII-40 /60/120This adjustmet will have to be done if the the cut line is not aligned with the print.Misaligned Print/Cut |
|
|
| Adjusting the Sensor Offset on Q-75/100's Series & Graphtec FC7000 series | |
| Q-75/100 series wARMS & Graphtec FC7000 SeriesSetting the SENSOR OFFSET (Method 1) Option |
|
|
| Auto Pre-Feed feature in Q Series and Graphtec plotters | |
| Auto Pre-Feed feature in Q Series and Graphtec plotters |
|
|
| Blades and Blade Holders | |
|
Blades and Blade Holders***Click here to view the entire article with pictures on Graphtec's website: |
|
|
| Communication problem with MAC 10.4 | |
|
I have a MAC computer with O/S 10.4 and a Graphtec cutter. I have verified that everthing is set up correctly, but I am still unable to do any cuts. Is there anything else I can try? |
|
|
| Cutter Maintenance | |
|
Cutter MaintenanceAs with all mechanical equipment, there are certain steps that should be taken to minimize the wear |
|
|
| Cutting Sandblast Effectively | |
| Cutting Sandblast EffectivelySandblasting is very common method for making wood signs and monuments. Sandblast resist, also kno |
|
|
| Cutting Vinyl Effectively | |
|
Cutting Vinyl EffectivelyGraphtec cutters do exceptionally well when cutting vinyl. Speed, accuracy, and precision are |
|
|
| Cutting with the Q /Qe Series through Corel Draw or Adobe Illustrator | |
|
Cutting with the Q / Qe Series through Corel Draw or Adobe Illustrator
NOTE: Please do not contact SignWarehouse Technical Support if you are having issues cutting from Corel or Adobe. We only supp |
|
|
| FLEXI 8 My Q Cutter Keeps reverting back to Condition 2, even after I change settings to Condition 1.... | |
| FLEXI 8 My Q Cutter Keeps reverting back to Condition 2, even after I change settings to Condition 1....This tutorial apply only for: |
|
|
| Graphtec & Q-Series Cutters : Testing the OFFSET | |
| Testing the OFFSETFor an explanation of OFFSET, review  What is the OFFSET value? |
|
|
| Graphtec & Q-Series Cutters : What is the OFFSET value? | |
| What is the OFFSET value?The offset value is the distance the plotter sends the blade past each corner. Notice the picture of the pen and the dashed line in the middle of the pen in fi |
|
|
| Graphtec & Q-Series Cutters : What is the QUALITY value for? | |
| What is the QUALITY value for?The quality has to do with the acceleration rate. Use this value to avoid torn corners.The general rule is |
|
|
| How do I return equipment for repair? | |
| How do I return equipment for repair? Only Applies for Vinyl CuttersA certified Signwarehou |
|
|
| How do I set my new PrismJET Extra, FlexiSignPro & Q-Series Vinyl Cutter ? | |
| How do I set my new PrismJET Extra, FlexiSignPro & Q-Series Vinyl Cutter ? |
|
|
| How do I stop the conditions on my Q or FC series cutter from being overridden? | |
| Generally when the condition settings on your vinyl cutter change on their own, it is due to a software setting on your cutting software overriding the settings on your vinyl cutter. Both the Q-series and FC7000 series cutters are factory set to assign |
|
|
| HPGL1 Error (hp-gl error 1) | |
| I have the vinyl cutter set up and read through the manual. I can't seem to get it to cut. I keep getting the hp-gl error 1. I'm running it through the US |
|
|
| Installing the Q-Series Cutter on Windows ME | |
|
Installing the Q-Series Cutter on Windows MEFor Windows 2000 / Windows XP, please see here: Q-Series on Win2k / XP |
|
|
| Mac Update - Updated CSM Files for LXi & FlexiSIGN Pro | |
| Mac Update - Updated CSM files for LXi & FlexiSIGN ProThis file will update your VE LXi (all levels, current version) and / or FlexiSIGN-PRO (current version only) with the new |
|
|
| My material is shooting out of the front of my Q Series. What do I do? | |
| If the Q-Series rolls material out of the front of the machine you need to press the NEXT key when it says Roll1 FRONT set or Roll2 FRONT set. This will change it to REAR set indicating that you are loading the material from the back of the machine. |
|
|
| My Q Cutter Keeps reverting back to Condition 2, even after I change settings to Condition 1.... | |
| My Q Cutter Keeps reverting back to Condition 2, even after I change settings to Condition 1....This tutorial applies to: All VE LXi All FlexiSign version 7.x |
|
|
| Q- Series Cutter Tips | |
| These are helpful tips & settings that we recommend when using your Q-Series plotter. If the Q-Series rolls material out of the front of the machine you need to press the NE |
|
|
| QE & QSeries: Write Port Error | |
| Write Port ErrorWrite Port Error indicates that there was a problem when trying to |
|
|
| QE60- Series Cutter Tips | |
| Here are a few tips that may help you when using your Qe60 Plus vinyl cutter.--------------------------------------------------------------------------------On the Qe60 Plus the se |
|
|
| Registration Mark Sensor Position Adjustment Q-75/100's & FC7000 Series | |
| Registration Mark Sensor Position AdjustmentQ-75/100's & FC7000 Series This procedure will have to be done if you are getting &q |
|
|
| UPDATED - How do I setup my cutter? | |
| How do I setup my cutter?or, "How do I connect my cutter to my computer?" - |
|
|
| UPDATED - I have a Graphtec FC7000, why isn't there a driver for it in LXi 7.5v5? | |
|
UPDATE - I have a Graphtec FC7000, why isn't there a driver for it in LXi 7.5v5?
Download and run the csm |
|
|
| Using the Graphtec Windows Driver | |
|
Using the Graphtec Windows DriverWhat is a Windows Driver? |
|
|
| What is the maximum / recommended cable length that I can run my cutter on | |
|
What is the maximum / recommended cable length that I can run my cutter on?
This will depend on how you're cutter is connected to your computer:
Serial (RS-232C)
Maximum Distance: |
|
|
| What to Do When Problems Arise | |
| What to Do When Problems AriseWhat to do in Panic Situations? |
|
|
| When I send a job to my cutter, it cuts a code up the side of my vinyl, what's going on? | |
| When I send a job to my cutter, it cuts a code up the side of my vinyl, what's going on? |
|
|
