Pinnacle M-Series Power and Speed Settings

 

Click on the wattage of the laser to view power and speed specifications.


** NOTE:
All these power and speed settings are good starting points. Power and speed settings will be dependant on different materials. (Different manufacturers, thicknesses and other variables will cause the power and speed settings
to differ slightly)


Wattage : M-12W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-40%
 
Acrylic (Cutting) SP-0.4% PO-100% 1/4"in
Back of Mirror SP-60% PO-100% Engrave Only
Bare Metal w/ Ferro N/A N/A
 
Ceramic Tile SP-100% PO-100% Engrave Only
 
Coated Brass SP-100% PO-60% Engrave Only
Crystal SP-100% PO-60% Engrave Only
Glass SP-100% PO-80% Engrave Only
Hardwood (Engraving) SP-100% PO-60%
 
Hardwood (Cutting) SP-0.4% PO-100% 1/8"in
Imitation Leather SP-100% PO-55% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-75%
 
Laserable Plastic (Cutting) SP-2.5% PO-100% 1/4"in
Leather SP-100% PO-35% Engrave Only
Marble SP-100% PO-100% Engrave Only
Mat Board SP-50% PO-100% Engrave Only
MDF (Engraving) SP-100% PO-80%
 
MDF (Cutting) SP-1.2% PO-100% 1/4in
Rubber Stamp (Engraving) SP-50% PO-100%
 
Rubber Stamp (Cutting) SP-0.8% PO-100% 1/8"in
Sign Foam SP-100% PO-80% Engrave Only
Softwood (Engraving) SP-100% PO-45%
 
Softwood (Cutting) SP-0.7% PO-100% 1/4"in

Wattage : M-25W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-45%
 
Acrylic (Cutting) SP-0.4% PO-100% 3/8"in
Back of Mirror SP-100% PO-80% Engrave Only
Bare Metal w/ Ferro SP-18% PO-100% Engrave Only
Ceramic Tile SP-100% PO-90% Engrave Only
Coated Brass SP-100% PO-25% Engrave Only
Crystal SP-100% PO-25% Engrave Only
Glass SP-100% PO-80% Engrave Only
Hardwood (Engraving) SP-100% PO-50%
 
Hardwood (Cutting) SP-0.4% PO-100% 3/16"in
Imitation Leather SP-100% PO-45% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-60%
 
Laserable Plastic (Cutting) SP-2.7% PO-95% 1/4"in
Leather SP-100% PO-25% Engrave Only
Marble SP-100% PO-80% Engrave Only
Mat Board SP-80% PO-100% Engrave Only
MDF (Engraving) SP-100% PO-65%
 
MDF (Cutting) SP-2.2% PO-100% 1/4in
Rubber Stamp (Engraving) SP-80% PO-100%
 
Rubber Stamp (Cutting) SP-2.0% PO-100% 1/8"in
Sign Foam SP-100% PO-65% Engrave Only
Softwood (Engraving) SP-100% PO-45%
 
Softwood (Cutting) SP-0.7% PO-100% 3/8"in

Wattage : M-40W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-40%
 
Acrylic (Cutting) SP-0.5% PO-100% 3/8"in
Back of Mirror SP-100% PO-75% Engrave Only
Bare Metal w/ Ferro SP-25% PO-100% Engrave Only
Ceramic Tile SP-100% PO-85% Engrave Only
Coated Brass SP-100% PO-20% Engrave Only
Crystal SP-100% PO-20% Engrave Only
Glass SP-100% PO-60% Engrave Only
Hardwood (Engraving) SP-100% PO-50%
 
Hardwood (Cutting) SP-0.4% PO-100% 3/8"in
Imitation Leather SP-100% PO-45% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-55%
 
Laserable Plastic (Cutting) SP-2.7% PO-95% 3/8"in
Leather SP-100% PO-25% Engrave Only
Marble SP-100% PO-75% Engrave Only
Mat Board SP-75% PO-100% Engrave Only
MDF (Engraving) SP-100% PO-60%
 
MDF (Cutting) SP-2.5% PO-100% 1/4in
Rubber Stamp (Engraving) SP-75% PO-100%
 
Rubber Stamp (Cutting) SP-2.5% PO-100% 1/8"in
Sign Foam SP-100% PO-60% Engrave Only
Softwood (Engraving) SP-100% PO-45%
 
Softwood (Cutting) SP-0.9% PO-100% 3/8"in

Wattage : M-60W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-40%
 
Acrylic (Cutting) SP-0.7% PO-100% 3/4"in
Back of Mirror SP-100% PO-65% Engrave Only
Bare Metal w/ Ferro SP-75% PO-100% Engrave Only
Ceramic Tile SP-100% PO-75% Engrave Only
Coated Brass SP-100% PO-15% Engrave Only
Crystal SP-100% PO-18% Engrave Only
Glass SP-100% PO-50% Engrave Only
Hardwood (Engraving) SP-100% PO-50%
 
Hardwood (Cutting) SP-0.9% PO-100% 3/8"in
Imitation Leather SP-100% PO-35% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-50%
 
Laserable Plastic (Cutting) SP-2.9% PO-95% 3/8"in
Leather SP-100% PO-20% Engrave Only
Marble SP-100% PO-65% Engrave Only
Mat Board SP-80% PO-100% Engrave Only
MDF (Engraving) SP-100% PO-50%
 
MDF (Cutting) SP-3.0% PO-100% 3/8in
Rubber Stamp (Engraving) SP-80% PO-100%
 
Rubber Stamp (Cutting) SP-2.7% PO-100% 5/16"in
Sign Foam SP-100% PO-50% Engrave Only
Softwood (Engraving) SP-100% PO-40%
 
Softwood (Cutting) SP-1.9% PO-100% 1/2"in

Wattage : M-75W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-35%
 
Acrylic (Cutting) SP-0.9% PO-100% 1/2"in
Back of Mirror SP-100% PO-55% Engrave Only
Bare Metal w/ Ferro SP-80% PO-100% Engrave Only
Ceramic Tile SP-100% PO-65% Engrave Only
Coated Brass SP-100% PO-10% Engrave Only
Crystal SP-100% PO-15% Engrave Only
Glass SP-100% PO-40% Engrave Only
Hardwood (Engraving) SP-100% PO-40%
 
Hardwood (Cutting) SP-1.5% PO-100% 3/8"in
Imitation Leather SP-100% PO-30% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-45%
 
Laserable Plastic (Cutting) SP-3.0% PO-95% 3/8"in
Leather SP-100% PO-15% Engrave Only
Marble SP-100% PO-55% Engrave Only
Mat Board SP-90% PO-80% Engrave Only
MDF (Engraving) SP-100% PO-45%
 
MDF (Cutting) SP-4.0% PO-100% 3/8in
Rubber Stamp (Engraving) SP-85% PO-100%
 
Rubber Stamp (Cutting) SP-3.0% PO-100% 1/4"in
Sign Foam SP-100% PO-40% Engrave Only
Softwood (Engraving) SP-100% PO-30%
 
Softwood (Cutting) SP-2.5% PO-100% 1/2"in

Wattage : M-100W

Material Speed and Power Setting Max Thickness for Cutting

Material Speed and Power Setting Max Thickness for Cutting
Acrylic (Engraving) SP-100% PO-30%
 
Acrylic (Cutting) SP-0.5% PO-100% 7/8"in
Back of Mirror SP-100% PO-35% Engrave Only
Bare Metal w/ Ferro SP-95% PO-100% Engrave Only
Ceramic Tile SP-100% PO-55% Engrave Only
Coated Brass SP-100% PO-8% Engrave Only
Crystal SP-100% PO-10% Engrave Only
Glass SP-100% PO-30% Engrave Only
Hardwood (Engraving) SP-100% PO-35%
 
Hardwood (Cutting) SP-1.9% PO-100% 3/8"in
Imitation Leather SP-100% PO-25% Engrave Only
Laserable Plastic (Engraving) SP-100% PO-35%
 
Laserable Plastic (Cutting) SP-4.0% PO-100% 3/8"in
Leather SP-100% PO-10% Engrave Only
Marble SP-100% PO-35% Engrave Only
Mat Board SP-90% PO-80% Engrave Only
MDF (Engraving) SP-100% PO-35%
 
MDF (Cutting) SP-4.0% PO-100% 3/8in
Rubber Stamp (Engraving) SP-90% PO-100%
 
Rubber Stamp (Cutting) SP-5.0% PO-100% 5/16"in
Sign Foam SP-100% PO-30% Engrave Only
Softwood (Engraving) SP-100% PO-20%
 
Softwood (Cutting) SP-2.9% PO-100% 5/8"in



** NOTE: All these power and speed settings are good starting points. Power and speed settings will be dependant on different materials. (Different manufacturers, thicknesses and other variables will cause the power and speed settings to differ slightly)