Chemica HotMark Heat Transfer Vinyl - 14.75 in x 22 ft - Fuschia
Shipping Weight: 1.60 lbs.
Product Details: Chemica HotMark Heat Transfer Vinyl - 14.75 in x 22 ft - Fuschia
Chemica US HotMARK 70
- Matte finish for cotton, polyester, acrylic fabrics
- Very thin, soft, and super stretchable
- 2.2 - 2.4 mil
- High speed cutting, ultra-fine detail, easy weeding
- 50 Colors
Application Directions: Reverse cut through adhesive layer to plastic backing. Cut with a 45 degree blade. Weed excess material. Lay cut pattern on fabric. Cover design area with teflon sheet. Heat transfer at 300 degrees F to 340 degrees F for 20 seconds with high pressure. Peel cold. Transferred image can be covered with Teflon sheet and reheated, if necessary.
Wash Instructions: Do NOT exceed water temperatures of 180 degrees F. Can be dry-cleaned. Do NOT dry in a tumble dryer.
- Customer Reviews
Average Customer Review: 4.66 out of 5 (6 Reviews)
Click here to write an review and share your thoughts with others.
HOTMARK 70 is #1
This is my number one choice in Heat transfer vinyl. I put my press on 335 for 20 sec with high pressure the first time, then I pull plastic backing cover off. Then apply teflon sheet and press again for 10 seconds at a high pressure. I still have shirts that I pressed 4 years ago that still look as good. Vinyl looks better than the shirt after years...Highly recommend
zayzcustomdecalandsigns (CUMBERLAND, KY) 9/24/2013
Hard to Find Right Settings?
I am having trouble pressing. Using 300F @ 20 seconds w/ teflon sheet. Top half seems like it doesnt want to stick, repressed looks a bit wrinklish. Am i doing something wrong with this or what?
EDITOR: Hello Fidel! Try increasing the pressure on your heat press. HotMark requires more pressure for the adhesive to set. Please click here for more information about this.
FIDEL MARTINEZ (SAN PABLO, CA) 10/22/2011
Hotmak 70 is worth the money!!!
Hotmark 70 is AWESOME DURABLE and I've been ordering it since. Grandparents love to show support for their grand-kids in sports. Other parents keep me busy with additional orders after they see the shirt I made. Thanks, Ruby for making it happen. Ordering is fast & easy.
Wally V. (Pasadena, TX) 3/31/2010
Best I Have Tried!
This EnduraTex HotMark 70 is the best product I've tried in this category, it does cut/weed easily. Also have not had any complaints from customers of letters falling off the garment.
Tammy Waites (Salem, AL) 1/27/2010
Hot Mark 70 is the BEST I've found
It is TRUELY easy weed and it withstands the abuse of my clothes drier. I find that the white adheres the best and if I press it again with a teflon sheet (after allowing it to cool & then removing the plastic) it doesn't lift or curl, even after multiple washes.
J Gravel (Escondido, CA) 8/30/2009