EnduraTEX GlitterPRINT Printable Heat Transfer Vinyl - 30 in x 22 ft - White Glitter
Shipping Weight: 4.00 lbs.
Product Details: EnduraTEX GlitterPRINT Printable Heat Transfer Vinyl - 30 in x 22 ft - White Glitter
EnduraTex GlitterPrint is a solvent/eco-solvent printable white Polyurethane heat transfer film on clear Polyester liner with a high metal flake content that looks like BLING or glitter T-shirt vinyl.
- Print right reading. Set printer platen heater and/or pre-heater on 45°C. Set dryer temperature at 50°C.
- Allow 4 hours to dry at room temperature.
- Contour cut (if desired) with 60° blade and weed carefully.
- Heat transfer tape is not required. If tape is desired, use ATT600 or comparable high tack heat transfer tape.
- Remove film from clear liner, position on garment.
- Cover with Silicone paper and press for 20 seconds with medium pressure at 360°F. If transfer tape is used, peel it hot.
- Strong>Care instructions: Wait at least 24 hours after pressing for first wash. Machine wash inside out in warm water (max 100°F). No Bleach or aggressive detergents. Tumble dry.