EnduraTEX GlitterPRINT Printable Heat Transfer Vinyl - 30 in x 66 ft - White Glitter
Shipping Weight: 11.00 lbs.
Product Details: EnduraTEX GlitterPRINT Printable Heat Transfer Vinyl - 30 in x 66 ft - White Glitter
EnduraTex GlitterPrint is a solvent/eco-solvent printable white Polyurethane heat transfer film on clear Polyester liner with a high metal flake content that looks like BLING or glitter T-shirt vinyl.
- Print right reading. Set printer platen heater and/or pre-heater on 45°C. Set dryer temperature at 50°C. Allow 4 hours to dry at room temperature.
Contour cut (if desired) with 60° blade and weed carefully
Heat transfer tape is not required. If tape is desired, use ATT600 or comparable high tack heat transfer tape.
Remove film from clear liner, position on garment.
Cover with Silicone paper and press for 20 seconds with medium pressure at 360°F. If transfer tape is used, peel it hot.
Care instructions: Wait at least 24 hours after pressing for first wash. Machine wash inside out in warm water (max 100°F). No Bleach or aggressive detergents. Tumble dry.
- Contents & Specs
- One roll of EnduraTEX GlitterPRINT - 30in x 66ft