EnduraTEX GlitterPRINT

Shipping Weight: 2.00 lbs.

EnduraTEX GlitterPRINT
×You will have to log in to add this item to your wish list.



Show More Colors +

Product Details: EnduraTEX GlitterPRINT

EnduraTex GlitterPrint is a solvent/eco-solvent printable white Polyurethane heat transfer film on clear Polyester liner with a high metal flake content that looks like BLING or glitter T-shirt vinyl.

  • Print right reading. Set printer platen heater and/or pre-heater on 45°C. Set dryer temperature at 50°C.
  • Allow 4 hours to dry at room temperature.
  • Contour cut (if desired) with 60° blade and weed carefully.
  • Heat transfer tape is not required. If tape is desired, use ATT600 or comparable high tack heat transfer tape.
  • Remove film from clear liner, position on garment.
  • Cover with Silicone paper and press for 20 seconds with medium pressure at 360°F. If transfer tape is used, peel it hot.
  • Strong>Care instructions: Wait at least 24 hours after pressing for first wash. Machine wash inside out in warm water (max 100°F). No Bleach or aggressive detergents. Tumble dry.


    Questions & Answers