Product Details: EnduraTEX HotMark Heat Transfer Vinyl - 20 in x 11 ft - Pastel Green

Overview

EnduraTEX HotMARK 70

Matte finish for cotton, polyester, acrylic fabrics

Very thin, soft, and super stretchable

2.2 - 2.4 mil

High speed cutting, ultra-fine detail, easy weeding

50 Colors 

  
Application Directions: 
Reverse cut through adhesive layer to plastic backing. Cut with a 45 degree blade. Weed excess material. Lay cut pattern on fabric. Cover design area with teflon sheet. Heat transfer at 300 degrees F to 340 degrees F for 20 seconds with high pressure. Peel cold. Transferred image can be covered with Teflon sheet and reheated, if necessary. 

Wash Instructions: 
Do NOT exceed water temperatures of 180 degrees F. Can be dry-cleaned. Do NOT dry in a tumble dryer.