EnduraTEX STARLIGHT Heat Transfer Vinyl - 15 in x 1 yd - Red
Shipping Weight: 0.40 lbs.
Product Details: EnduraTEX STARLIGHT Heat Transfer Vinyl - 15 in x 1 yd - Red
T-shirt and custom apparel decorators are always looking for something different! They want that extra pizzazz that makes an image pop right off the shirt. EnduraTex STARLIGHT provides that rich, fashionable glitter look in a glossy smooth film presentation. Get an expensive look without the rough sandpaper feel.
Not only does this film love to make a statement for whoever wears the garment, it's also very soft to the touch and it gets softer with each washing. And unlike other glitter films on the market, this product has a unique stretch component to it. Excellent for any type of design creation especially prep wear and dancewear.
- Actual film width: 14.75 inches
- Glossy polyurethane flex with sparkling glitters
- For cotton, polyester and similar fibers
- Very thin, soft and stretchable 5.5 - 7.8 mil
Recommendations: Self adhesive carrier
Heat pressing: 300 - 350 degrees F for 15-20 seconds
Application Directions: Before transfer, protect the product from light, weed carefully. Reverse cut, use 45 degree blade. Lay cut pattern on fabric. A release teflon sheet should always be used. Heat transfer at 300-350 degree F for 15-20 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated, if necessary. Wash at temperatures up to 140 degrees F.