EnduraTEX STYLE Heat Transfer Vinyl - 15 in x 5 yds - Hunter Oak Beige

ET-STYLE-15-5YD-1664

Be the first to review this product

Shipping Weight: 0.95 lbs.

EnduraTEX STYLE Heat Transfer Vinyl - 15 in x 5 yds - Hunter Oak Beige
×You will have to log in to add this item to your wish list.
Processing...

$58.45


Product Details: EnduraTEX STYLE Heat Transfer Vinyl - 15 in x 5 yds - Hunter Oak Beige

Overview

enduraTEX STYLE

Have you ever wanted a multi-print pattern on garments for your customers but didn't have the screen printing or digital printing set up to attain those looks? Well now you can! The best part is that we have handpicked several popular patterns that have been requested by the market and had them printed into thermal transfer media. All you have to do is design cut and apply that's it. No messy screen printing stencils or clean up. No wasted set up time. No limitations as to the volume. Create one or a thousand it doesn't matter.

• Matte polyurethane flex with patterns - For use with cotton polyester and similar fabrics
• Self adhesive carrier
• 2 mil very thin & flexible soft super-stretchable
• Actual material size: 14.75 inch width
• 36 patterns
• Can be layered with RESOLVE PLUS
• Use a 45 degree blade
• Heat pressing: 300-350 degree F for 15-20 seconds
• Hard pressure. Peel cold

Application Directions: Reverse cut use 45 degree blade through adhesive layer (dull side) to plastic backing. Weed excess material. Lay cut pattern on fabric. Cover design area with teflon sheet. Heat transfer at 300-350 degree F for 15-20 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated if necessary

Wash Instructions: Don’t exceed water temperatures of 140 degree F. Tumble dry not recommended

Applications
EnduraTex STYLE Application Instructions

  • Matte polyurethane flex with patterns - For use with cotton polyester and similar fabrics
  • Self adhesive carrier
  • 2 mil very thin & flexible soft super-stretchable
  • Actual material size: 14.75 inch width
  • 36 patterns
  • Can be layered with RESOLVE PLUS
  • Use a 45 degree blade
  • Heat pressing: 300-350 degree F for 15-20 seconds
  • Hard pressure. Peel cold
  • Application Directions: Reverse cut use 45 degree blade through adhesive layer (dull side) to plastic backing. Weed excess material. Lay cut pattern on fabric. Cover design area with teflon sheet. Heat transfer at 300-350 degree F for 15-20 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated if necessary
  • Wash Instructions: Don’t exceed water temperatures of 140 degree F. Tumble dry not recommended
  • Video
     
    Customer Reviews
    Average Customer Review: Not yet rated

    Click here to write an review and share your thoughts with others.