LXF Dark 2-Step Laser Transfer Paper - 'A' Foil and 'B" Paper - (50) 11.7 in x 16.5 in

Shipping Weight: 3.80 lbs.

LXF Dark 2-Step Laser Transfer Paper - 'A' Foil and 'B" Paper - (50) 11.7 in x 16.5 in
×You will have to log in to add this item to your wish list.



Product Details: LXF Dark 2-Step Laser Transfer Paper - 'A' Foil and 'B" Paper - (50) 11.7 in x 16.5 in

LXF Dark 2-Step Laser Transfer Paper - 'A' Foil and 'B" Paper - (50) 11.7 in x 16.5 in

LXF Dark 
is a unique, new, self-weeding solution for heat transfer applications on light, dark and colored textiles. The 2-sheet solution is recommended for use with OKI WT and iColor laser printers for decorating dark garments with white toner.  Proper use produces brilliant color, soft transfers, and consistent results.

The unique benefit of LXF Dark is the fact that both steps require the same temperature and pressure. No more guessing at how much pressure to use as you go from step one to step two! 

LXF Dark is the simplest laser transfer solution in America!Each package includes sheets of both transparent printing foil and opaque adhesive transfer paper. The foil is printed in your laser textile printer and married to the transfer paper on a heat press. When the sheets are separated, the transfer paper coats the toner with a layer of opaque, white adhesive. Then the coated foil sheet is pressed to apparel to transfer the printed image. 

  • Transparent imaging sheet for precise placement of transfer on garment 
  • Consistent pressure setting for both steps simplifies process
  • Specially coated adhesive transfer sheets make consistent, sellable transfer easier than ever
  • Fully compatible with OKI 711WT, OKI PRO 920WT, OKI Pro 8432WT, and iColor Series laser transfer printers


  • Cotton
  • Polyester
  • Cotton-poly blends
  • Denim
  • Mouse pads, etc.

  • Place A Foil in printer matte side up. Print on the transparent A-Foil using the Transparency or Foil media type setting
  • Pre-heat the press table by closing the press for 1 - 2 minutes prior to  step one 
  • Place the A Foil and B Paper together with the white side of B paper facing matte side of the A Foil. The A-Foil should be on the bottom
  • Press for 80 seconds at 310° F(155°C) with heavy pressure (45psi)
  • Peel hot. As soon as the press cycle ends, peel the adhesive paper back along the platen in a smooth, steady slow motion
  • Place matte side down, 'right reading' on apparel. Cover with Teflon sheet or silicone coated craft paper and press with the same high pressure for 30 seconds
  • Peel cold. Place the garment on a cool flat surface.  Allow transfer to cool to room temperature. Remove the foil by rolling back along the shirt in a smooth steady motion
  • To fix the toner on the fabric, cover the transfer with Silicone kraft paper and re-press with medium pressure (35psi) for 20 seconds
  • Wait five seconds, remove the silicone transfer paper, and mildly stretch the garment
  • Wash decorated garments inside-out in cold water
  • Do not use fabric softener, detergent pods, bleach or harsh detergents
  • Tumble dry on low heat
  • Do not iron decorated area. Iron inside-out if necessary
Contents & Specs

Box of 50 sheets of LXF Dark "A" Foil and B Paper self-weeding laser transfer media - 11.7" x 16.5"

  • Transparent print media for exact positioning
  • Low processing temperature (310°F/155°C)
  • One pressure setting for simpler workflow 
  • Excellent opacity and washability
  • High processing tolerance, especially when separating A & B papers
  • Suitable for OKI and iColor white toner textile transfer printers

Questions & Answers