Chemica US Metallics Very glossy polyurethane flex 10 colors For cotton, polyester, acrylic and non-siliconized material Very thin and stretchable, 2.4 mil Self adhesive carrier Heat pressing: 280-300 degrees F for 10-20 seconds Application Directions:
Reverse or mirror cute with 45 degree angle blade and peel cool. Weed excess material. Lay cut pattern on fabric. A release teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design. Heat transfer at 280-300 degrees F for 15-20 seconds. Peel cold. Transferred image can be covered with teflon sheet and reheated, if necessary. Wash Instructions
Hand wash on reverse side. Do NOT dry in a tumble dryer.
Sold By: SignWarehouse
More information available at: https://www.signwarehouse.com/p/metallics