Product Details: SISER Glitter Heat Transfer Vinyl - 12 in x 30 ft - Mermaid Blue

Overview

Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Kids of all ages love the shimmer and pop, and since it’s CPSIA Certified it’s safe to apply on kids clothing. But did you know you can also sublimate directly onto white Siser Glitter!? Watch the video on how to sublimate here!

Glitter is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories. (CPSIA Certified - This product has been independently lab tested and is Phthalate & Lead compliant and is safe for application on children's products.)

FEATURES:

• Dazzling “glitter” ultra metallic thermal transfer film on clear PET
• 14 mil
• Cut with 60 degree blade. Heat pressing: 302-320 degree F for 10-15 seconds
• NOT recommended for layered graphics

Applications

APPLICATIONS:

• 100% cotton
  
• Poly/cotton blends
  
• 100% polyester
  
• Leather
  

APPLICATION INSTRUCTIONS:

Home Iron:

• Set iron dial between Cotton and Linen
  
• Cover design with Kraft paper or non-stick cover sheet
  
• Place on flat, hard surface (ironing board not recommended)
  
• Press iron with medium/firm pressure (do not slide iron)
  
• Press each section of design for 10-15 seconds
  
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier hot or cold
  

Heat Press:

• Cut in reverse
  
• Weed excess material
  
• Preheat garment for 2-3 seconds
  
• Apply design at 320°F/160°C
  
• Use firm pressure for 15-20 seconds
  
• Peel carrier warm
  

WASH INSTRUCTIONS:

• Wait 24 hours before 1st wash
  
• Machine wash warm or cold / mild detergent
  
• Dry on normal dryer setting
  
• Do not dry clean
  

Contents & Specs

CONTENT:

(1) Roll SISER Glitter Heat Transfer Vinyl - 20 in x 150ft

SPECIFICATIONS:

• PU Composition
  
• Pressure sensitive backing
  
• Glitter finish
  
• 325 Microns/12.8 Mils
  
• 45°/60° blade
  
• Do not layer