SISER TTD Easy Mask Heat Transfer Tape - 29.5 in x 150ft
Shipping Weight: 9.00 lbs.
Product Details: SISER TTD Easy Mask Heat Transfer Tape - 29.5 in x 150ft
SISER TTD Easy Mask
- Cut a piece of mask slightly wider than the image to cover
- Remove the paper backing from the mask and set aside
- Adhesive side up, place the mask down on a smooth, firm surface
- With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
- Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
- Life a corner of the mask, use a steady motion to separate the mask from the image
- Place the transferred image back on the shiny side of the original masking paper you had set aside. Recommend using Cold Laminator for large production runs