SISER TTD Easy Mask Heat Transfer Tape - 29.5 in x 30ft

TEX-SI-TTDE-29530

3 out of 53 out of 53 out of 53 out of 53 out of 5 () | Write a Review

Shipping Weight: 3.00 lbs.

SISER TTD Easy Mask Heat Transfer Tape - 29.5 in x 30ft
×You will have to log in to add this item to your wish list.
Processing...

$38.70


Product Details: SISER TTD Easy Mask Heat Transfer Tape - 29.5 in x 30ft

Overview

SISER TTD Easy Mask

  • Cut a piece of mask slightly wider than the image to cover
  • Remove the paper backing from the mask and set aside
  • Adhesive side up, place the mask down on a smooth, firm surface
  • With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
  • Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
  • Life a corner of the mask, use a steady motion to separate the mask from the image
  • Place the transferred image back on the shiny side of the original masking paper you had set aside. Recommend using Cold Laminator for large production runs
  • Customer Reviews
    Average Customer Review: 3 out of 53 out of 53 out of 53 out of 53 out of 5 3 out of 5 (1 Reviews)

    Click here to write an review and share your thoughts with others.


    3 out of 53 out of 53 out of 53 out of 53 out of 5 Works OK, would be even better with more "tack".

    Works ok, but would like it to have more "tack" to it.
    Ed Butcher (Stewart, TN) 9/21/2013