VE R24/R31 Cutting Strip

PLTA-R31-STRIP

4 out of 54 out of 54 out of 54 out of 54 out of 5 () | Write a Review

Shipping Weight: 0.60 lbs.

VE R24/R31 Cutting Strip
×You will have to log in to add this item to your wish list.
Processing...

$12.00


Product Details: VE R24/R31 Cutting Strip

Overview
The cutter protection strip is one of the most important parts on the cutter. It allows for straight and true cuts without any jagged edges or ruined material. The cutting strip is the white strip under the blade that runs the length of the cutter. Worn cutting strips cause inconsistent cutting; unclean cuts, and premature blade wear. For the best cutting results, replace the cutting strip every six months and it is always a good idea to have one as a back-up. Compatible with the R24 and R31 VE Vinyl Cutters.
Customer Reviews
Average Customer Review: 4 out of 54 out of 54 out of 54 out of 54 out of 5 4 out of 5 (2 Reviews)

Click here to write an review and share your thoughts with others.


5 out of 55 out of 55 out of 55 out of 55 out of 5 R31 Cutter Review

I was a little nervous going from a QE60Plus to an R series, but to tell you the direct this cutter works amazing. I can get 20' runs and it only moves a 1/4" on the tracking. I am very happy with this machine. I am ordering a 54" cutter for the larger jobs soon. great job guys and gals, keep up the great service and customer support.
Douglas Budai (Cleveland, TX) 12/15/2012


3 out of 53 out of 53 out of 53 out of 53 out of 5 Does it's job....I guess.

The strip is longer, I had a half inch left on each side. I cut it off; not a real big deal. The adhesive was a little dirty; I thought it wouldn't stick, but it is ok. Don't notice any improvement in cutting over the original one. So I would say if it isn't nicked then keep your cutting strip in. Or replace your blade first.
Justin Eclarin (Hollister, CA) 8/27/2012